SN74LS166ADG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CLOCK INHIBIT |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 30 ns |
| Family | LS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 32mA |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS166ADG4 Overview
As a result, SOIC package contains the embedded device. It sums up to 16 where the chip's terminations add up. The part operates at 5V voltage. A total of 1 elements are present on this part. Devices with 16 pins are available. Mounting by Surface Mount is recommended. Electronic components fall under the category of LS. It is noted that the operating supply voltage of this chip falls within the range 5V. Additionally, this section contains the following: CLOCK INHIBIT. There are 9 input lines available in the device. Voltage can be delivered at 5V. It has 8 bits in total. 16 pins are present on it. It is recommended that it be used at temperatures below 70°C. Operation of this device requires a value greater than 0°C. Under 5.25V, this supply voltage is employed. This supply voltage is employed higher than 4.75V. Shift Registers is its subcategory.
SN74LS166ADG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS166ADG4 Applications
There are a lot of Texas Instruments SN74LS166ADG4 Shift Registers applications.
- Parallel data
- 8-bit data storage
- data manipulation
- ROM Chips
- Generate time delay toward digital circuits
- Data Format Converters
- temporary data storage
- Sequence generator
- Remote control holding register
- Data manipulation