SN74LS165ANE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 949.99252mg |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 35 ns |
| Family | LS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS165ANE4 Overview
This device can be found embedded within the package PDIP. 16 is the total number of terminations on the chip. Voltage rating of the part is 5V. It is a part that has 1 elements on it. 16 pins are provided on the device. The recommended mounting method is Through Hole. Electronic components fall under the category of LS. It is noted that the operating supply voltage of this chip falls within the range 5V. Additional aspects of this section include: SISO OPERATION ALSO AVAILABLE. This device has 9 input lines available. Devices with voltage delivery capabilities of 5V are available. A total of 8 bits are present on an IC chip. 16 pins are on it. Under temperatures below 70°C, it is recommended to use it. In order for this device to function, the value should not be less than 0°C. A voltage of 5.25V is used to supply this voltage. There is a voltage applied to the supply that is greater than 4.75V. In its subcategory, it is listed under Shift Registers. TUBE is the packaging way for the part.
SN74LS165ANE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
Packing Method : TUBE
SN74LS165ANE4 Applications
There are a lot of Texas Instruments SN74LS165ANE4 Shift Registers applications.
- Data Format Converters
- 8-bit data storage
- store data in digital form
- Counter
- Remote control holding register
- temporary data storage
- Serial-to-parallel data conversion
- Flash Memory
- Serial-to-parallel data conversion
- 7-segment display control