SN74LS165ADG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 35 ns |
| Family | LS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS165ADG4 Overview
There is an embedded device in the package SOIC. A total of 16 terminations can be found on the chip. A voltage of 5V is specified for the part's operating supply. A total of 1 elements can be found on this part. 16 pins are present on the device. As a general recommendation, mounting by Surface Mount is recommended. There is an electronic component in the LS. It's noted that the chip's operating supply voltage is in the range 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. In the device, there are 9 input lines. There is a capability to deliver voltage at 5V. It has 8 bits in total. The pin count is 16. Temperatures below 70°C are recommended for use. This device should not be operated below 0°C. Under 5.25V, this supply voltage is employed. There is a voltage applied to the supply that is greater than 4.75V. The subcategory of this item is Shift Registers.
SN74LS165ADG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS165ADG4 Applications
There are a lot of Texas Instruments SN74LS165ADG4 Shift Registers applications.
- Sequence generator
- ROM Chips
- Serial-to-parallel data conversion
- Pattern Recognizers
- Parallel to serial converter
- Output expansion
- Pseudo Random Pattern Generator
- Data Processors
- Counter
- Serial to parallel converter