SN74LS165ADE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 35 ns |
| Family | LS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 30mA |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS165ADE4 Overview
The device is embedded in SOIC package. Chip terminations add up to 16. There is 5V operating supply voltage listed on the part. 1 elements make up this part. 16 pins are provided on the device. Using Surface Mount as a mount point is recommended. The electronic component belongs to the LS. As noted, this chip operates within the range of 5V. There are also the following additional considerations in this section: SISO OPERATION ALSO AVAILABLE. There are 9 input lines available in the device. Voltage can be delivered at 5V. There are 8 bits on the IC chip. The pin count is 16. A temperature below 70°C is recommended for its use. In order to operate the device, the value should not fall below 0°C. 5.25V is the supply voltage used. It is used at a higher voltage than 4.75V. In terms of its subcategory, it belongs to Shift Registers.
SN74LS165ADE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS165ADE4 Applications
There are a lot of Texas Instruments SN74LS165ADE4 Shift Registers applications.
- Output expansion
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- Pseudo Random Pattern Generator
- Counter
- store data in digital form
- data manipulation
- Data Format Converters
- Parallel data