SN74LS164DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | GATED SERIAL INPUTS (A AND B) |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 32 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Number of Output Lines | 8 |
| fmax-Min | 36 MHz |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS164DRG4 Overview
There is a SOIC package embedded with the device. This chip has a total termination count of 14. The case Tape & Reel (TR) contains it. There is 5V operating supply voltage listed on the part. 14 pins are present on the device. As a general recommendation, mounting by Surface Mount is recommended. Electronic components are categorized as LS. In terms of supply voltage, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: GATED SERIAL INPUTS (A AND B). The device has 2 input lines. There is a possibility of delivering voltage at 5V. There are 8 bits on the IC chip. In total, there are 14 pins on it. Under temperatures below 70°C, it is recommended to use it. For this device to work, it should not go below 0°C. Under 5.25V, this voltage is employed. It is used at a voltage greater than 4.75V. There are 8 output lines to operate. This device consists of 1 circuits in total.
SN74LS164DRG4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 5V power
With 8 output lines
SN74LS164DRG4 Applications
There are a lot of Texas Instruments SN74LS164DRG4 Shift Registers applications.
- 8-bit data storage
- Serial-to-parallel data conversion
- Counter
- Remote control holding register
- Interconnectors
- store data in digital form
- 7-segment display control
- Data manipulation
- Data Processors
- temporary data storage