SN74LS164DR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | GATED SERIAL INPUTS (A AND B) |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74LS164 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Propagation Delay | 32 ns |
| Turn On Delay Time | 36 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 3 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS164DR Overview
In package 14-SOIC (0.154, 3.90mm Width), there is an embedded device. It sums up to 14 where the chip's terminations add up. The Tape & Reel (TR) case contains it. Voltage rating of the part is 5V. On this part, there are 1 elements. It is equipped with a pin count of 14. As a general recommendation, mounting by Surface Mount is recommended. This electronic component is classified as LS. Mounted in the same way as Surface Mount. A temperature range of 0°C~70°C is used for the operating environment. Votage is supplied within 4.75V~5.25V. In this case, the electrical component belongs to the series 74LS. Similar parts can be found using the 74LS164 family. A range of 5V is noted as the operating supply voltage of this chip. This section has the following additional features: GATED SERIAL INPUTS (A AND B). A voltage of 5V can be delivered by it. A total of 3 output lines are available for operation. There are 2 circuits in this device. TR is used to package the part.
SN74LS164DR Features
With 14 pins
Mounted in Surface Mount type.
Based on 74LS164 family
Operate supply voltage at 5V
It supplies 5V power
With 3 output lines
Packing Method : TR
SN74LS164DR Applications
There are a lot of Texas Instruments SN74LS164DR Shift Registers applications.
- Remote control holding register
- Interconnectors
- Output expansion
- store data in digital form
- temporary data storage
- Cache memory in CPU
- Serial-to-parallel data conversion
- Flash Memory
- Counter
- 8-bit data storage