SN74HCT273NSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 37MHz |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 15 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 29ns @ 5.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT273NSR Overview
It is embeded in 20-SOIC (0.209, 5.30mm Width) case. Package Tape & Reel (TR)embeds it. T flip flop is configured with an output of Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The 74HCTseries comprises this type of FPGA. There should be no greater frequency than 37MHzon its output. A total of 1 elements are present. Despite external influences, it consumes 8μAof quiescent current. A total of 20 terminations have been made. The object belongs to the 74HCT273 family. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 3pF farads. A device of this type belongs to the family of HCT. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. The design is based on 8bits. The superior flexibility is achieved through the use of 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. The D latch runs on a voltage of 5V volts. In order to ensure high efficiency, the supply voltage should remain at 5V. This input has 3lines.
SN74HCT273NSR Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT273NSR Applications
There are a lot of Texas Instruments SN74HCT273NSR Flip Flops applications.
- Data Synchronizers
- Data transfer
- Balanced Propagation Delays
- Synchronous counter
- ESD performance
- Differential Individual
- Cold spare funcion
- Bounce elimination switch
- Latch
- Event Detectors