SN74HC595PWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595PWRE4 Overview
16-TSSOP (0.173, 4.40mm Width) package contains the device. It sums up to 16 where the chip's terminations add up. It is used to pack in Tape & Reel (TR) case. 5V is the part's operating supply voltage. Devices with 16 pins are available. It is recommended to mount by Surface Mount. Electronic components fall under the category of HC/UH. Its mounting method is Surface Mount. A temperature range of -40°C~85°C is used for operation. During operation, the voltage is within the range of 2V~6V. In this case, the electrical component belongs to the series 74HC. You can search for similar parts based on the 74HC595 family. According to the specification, this chip's operating supply voltage falls within the range of 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, Vsup should not be less than 2V. The device has a total of 1 input lines. Voltage can be delivered at 2/6V by the device. It should not exceed 6V in terms of the supply voltage (Vsup). A total of 9 output lines are available for operation. TR is the way the part is packaged.
SN74HC595PWRE4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC595PWRE4 Applications
There are a lot of Texas Instruments SN74HC595PWRE4 Shift Registers applications.
- 7-segment display control
- Dual-rank shift, hold, and bus applications
- Data Format Converters
- data manipulation
- Remote control holding register
- Pattern Recognizers
- Flash Memory
- 8-bit data storage
- Parallel data
- Delay Line