SN74HC595PWR
| Parameters | |
|---|---|
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Input Current | 1μA |
| Number of Output Lines | 10 |
| fmax-Min | 29 MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 42MHz |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Propagation Delay | 34 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
SN74HC595PWR Overview
There is a 16-TSSOP (0.173, 4.40mm Width) package embedded with the device. 16 is the total number of terminations on the chip. There is a Tape & Reel (TR) case containing it. The part's operating supply voltage is rated 5V. 1 elements are present in this part. There are 16 pins on the device. Using Surface Mount as a mount point is recommended. An electronic component is included in the HC/UH. In Surface Mount, this component is mounted. A temperature range of -40°C~85°C is used for the operating environment. The voltage supplied to it is within the range of 2V~6V. 74HC is the series number of this electrical component. The 74HC595 family can be used to find similar parts. It's noted that the chip's operating supply voltage is in the range 5V. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There must be a minimum supply voltage (Vsup) of 2V for this part. It can deliver voltage at 2/6V. This part requires a maximum supply voltage (Vsup) of 6V. It is necessary to operate 10 output lines. 8μA is the quiescent current. 4 circuits are present in this device. The part is packaged in the way of TR. 42MHz is the device's frequency.
SN74HC595PWR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR
SN74HC595PWR Applications
There are a lot of Texas Instruments SN74HC595PWR Shift Registers applications.
- 8-bit data storage
- Cache memory in CPU
- LED matrix control
- Data Processors
- Parallel to serial converter
- Flash Memory
- data manipulation
- store data in digital form
- ROM Chips
- Interconnectors