SN74HC595PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC595PWG4 Overview
There is a TSSOP package embedded with the device. 16 is the sum of the number of terminations in the chip. Its operating supply voltage is rated at 5V. It is a part that has 1 elements on it. 16 pins are present on the device. Surface Mount is recommended for mounting. There is an electronic component in the HC/UH. It is noted that this chip uses an operating supply voltage of 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. IC chip bits total 8. In total, it has 16 pins. It should be used below 85°C. Operation of this device requires a value greater than -40°C. A voltage of 6V is used to supply this voltage. Voltages higher than 2V are used for this supply. Operating on 9 output lines is possible.
SN74HC595PWG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74HC595PWG4 Applications
There are a lot of Texas Instruments SN74HC595PWG4 Shift Registers applications.
- Data manipulation
- Delay Line
- Parallel to serial converter
- data manipulation
- Pattern Recognizers
- Pseudo Random Pattern Generator
- Generate time delay toward digital circuits
- ROM Chips
- Serial-to-parallel data conversion
- Serial to parallel converter