SN74HC595PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC595PWE4 Overview
TSSOP package contains the device. 16 is the total number of terminations on the chip. A Rail/Tube case is used to pack it. A voltage of 5V is specified for the part's operating supply. This part has 1 elements. There are 16 pins on the device. Surface Mount is recommended for mounting. The electronic component belongs to the HC/UH. In terms of supply voltage, this chip operates within the range of 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There are 8 bits in the IC chip. 16 pins are on it. This product should not be used at temperatures above 85°C. This device should not be operated with a value lower than -40°C. It is employed under the condition of 6V. The supply voltage is higher than 2V. There are 9 output lines to operate.
SN74HC595PWE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74HC595PWE4 Applications
There are a lot of Texas Instruments SN74HC595PWE4 Shift Registers applications.
- Pulse Extenders
- Pattern Recognizers
- Counter
- Parallel to serial converter
- data transfer
- Cache memory in CPU
- Interconnectors
- Data Format Converters
- 8-bit data storage
- store data in digital form