SN74HC595PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 42MHz |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 34 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595PW Overview
As a result, 16-TSSOP (0.173, 4.40mm Width) package contains the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. There is a Tube case containing it. There is 5V operating supply voltage listed on the part. 16 pins are provided on the device. It is recommended to mount by Surface Mount in order to get the best results. This electronic component is classified as HC/UH. This component is mounted in the way of Surface Mount. A temperature range of -40°C~85°C is used for the operating environment. The voltage supplied to it is within the range of 2V~6V. The 74HC series is associated with this electrical component. Search for similar parts based on the 74HC595 family. As noted, this chip operates within the range of 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There must be a minimum supply voltage (Vsup) of 2V for this part. In the device, there are 1 input lines that are available for use. Voltage can be delivered at 2/6V by the device. A maximum supply voltage (Vsup) of 6V may be applied to this part. 9 output lines are available for operation. The device runs its frequency at 42MHz.
SN74HC595PW Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
SN74HC595PW Applications
There are a lot of Texas Instruments SN74HC595PW Shift Registers applications.
- Output expansion
- Flash Memory
- Pulse Extenders
- Counter
- 8-bit data storage
- temporary data storage
- Delay Line
- Data Processors
- Parallel data
- LED matrix control