SN74HC595NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC595NSRG4 Overview
There is an embedded device in the package SOP. 16 is the number of terminations on the chip. There is a Tape and Reel case containing it. 5V is the part's operating supply voltage. 1 elements make up this part. It is equipped with a pin count of 16. It is recommended to mount by Surface Mount. Electronic components are categorized as HC/UH. It is noted that this chip uses an operating supply voltage of 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. A total of 8 bits are present on an IC chip. In total, it has 16 pins. Temperatures below 85°C are recommended for use. Operation of this device requires a value greater than -40°C. It is used under the 6V supply voltage. It is necessary to use a voltage that is higher than 2V to provide this supply. A total of 9 output lines need to be operated.
SN74HC595NSRG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74HC595NSRG4 Applications
There are a lot of Texas Instruments SN74HC595NSRG4 Shift Registers applications.
- Data Format Converters
- Remote control holding register
- Interconnectors
- Cache memory in CPU
- Remote control holding register
- Pattern Recognizers
- data transfer
- data manipulation
- Parallel data
- Output expansion