SN74HC595NSRE4
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.005886mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
SN74HC595NSRE4 Overview
As a result, SOP package contains the embedded device. It sums up to 16 where the chip's terminations add up. There is a Tape and Reel case containing it. Its operating supply voltage is rated at 5V. This part has 1 elements. It has 16 pins. It is recommended to mount by Surface Mount in order to get the best results. The electronic component belongs to the HC/UH. As noted, this chip operates within the range of 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. The total number of IC chip bits is 8. In total, there are 16 pins on it. This product should not be used at temperatures above 85°C. This device should not be operated below -40°C. 6V is the supply voltage used. There is a voltage applied to the supply that is greater than 2V. A total of 9 output lines need to be operated.
SN74HC595NSRE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74HC595NSRE4 Applications
There are a lot of Texas Instruments SN74HC595NSRE4 Shift Registers applications.
- 7-segment display control
- Interconnectors
- Output expansion
- Sequence generator
- Pulse Extenders
- data manipulation
- Dual-rank shift, hold, and bus applications
- Serial to parallel converter
- 8-bit data storage
- Flash Memory