SN74HC595NSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 34 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595NSR Overview
There is a 16-SOIC (0.209, 5.30mm Width) package embedded with the device. This chip has a total termination count of 16. This item is packed in case Tape & Reel (TR). 5V is the operating supply voltage of the part. 16 pins are present on the device. The recommended mounting method is Surface Mount. In this case, the electronic component belongs to the HC/UH. Mounting of this component is indicated by Surface Mount. A temperature range of -40°C~85°C is used for operation. Votage within 2V~6V is supplied. 74HC is the series number of this electrical component. By using the 74HC595 family, you can find similar parts. It is noted that this chip uses an operating supply voltage of 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There should be no voltage less than 2V at the minimum supply voltage (Vsup). In the device, there are 1 input lines. A voltage of 2/6V is possible with this device. It should not exceed 6V in terms of the supply voltage (Vsup). Operating on 9 output lines is possible. The current is 8μA during quiescent operation. The part is packaged in the way of TR.
SN74HC595NSR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Quiescent Current at 8μA
Packing Method : TR
SN74HC595NSR Applications
There are a lot of Texas Instruments SN74HC595NSR Shift Registers applications.
- data transfer
- Dual-rank shift, hold, and bus applications
- Parallel data
- store data in digital form
- Pattern Recognizers
- Generate time delay toward digital circuits
- Serial to parallel converter
- ROM Chips
- Sequence generator
- Delay Line