SN74HC595NE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 10 |
| fmax-Min | 29 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595NE4 Overview
Embedded in a package of type 16-DIP (0.300, 7.62mm), the device is available for use. Taking the total number of terminations on the chip and adding them up, we get 16. This item is packed in case Tube. The part's operating supply voltage is rated 5V. On this part, there are 1 elements. The device is equipped with 16 pins. The mounting method should be Through Hole. An electronic component is included in the HC/UH. As you can see, this component is mounted in the way of Through Hole. There is a range of temperatures -40°C~85°C for operation. There is a votage of 2V~6V provided with it. The 74HC series is associated with this electrical component. Similar parts can be found using the 74HC595 family. The operating supply voltage of this chip is noted to be within the range 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There should be no less than 2V supply voltage (Vsup) for this part. A voltage of 2/6V is possible with this device. The maximum supply voltage (Vsup) for this part should not be more than 6V. 10 output lines are available for operation. 4 circuits are present in this device.
SN74HC595NE4 Features
With 16 pins
Mounted in Through Hole type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
SN74HC595NE4 Applications
There are a lot of Texas Instruments SN74HC595NE4 Shift Registers applications.
- Counter
- 8-bit data storage
- 7-segment display control
- data transfer
- Interconnectors
- Cache memory in CPU
- ROM Chips
- Parallel data
- Pulse Extenders
- Delay Line