SN74HC595DWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Propagation Delay | 34 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 10 |
| fmax-Min | 29 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595DWR Overview
This device can be found embedded within the package 16-SOIC (0.295, 7.50mm Width). There are 16 terminations on the chip. This item is packed in case Cut Tape (CT). There is 5V operating supply voltage listed on the part. A total of 1 elements can be found on this part. In this device, there are 16 pins. It is recommended that the mount should be done by Surface Mount. It is a component of the HC/UH. In Surface Mount, this component is mounted. A temperature range of -40°C~85°C is used for operation. Votage is provided within 2V~6V. The 74HC series represents this electrical component. Similar parts can be found using the 74HC595 family. In terms of supply voltage, this chip operates within the range of 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. The minimum supply voltage (Vsup) for this part should not be less than 2V. A device capable of delivering voltage at 2/6V can be used. The maximum supply voltage (Vsup) for this part should not be more than 6V. A total of 10 output lines are available for operation. There is a quiescent current of 8μA flowing through it. This device contains 4 circuits. There is a TR package for the part.
SN74HC595DWR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR
SN74HC595DWR Applications
There are a lot of Texas Instruments SN74HC595DWR Shift Registers applications.
- Parallel to serial converter
- Delay Line
- store data in digital form
- LED matrix control
- Serial-to-parallel data conversion
- Counter
- Flash Memory
- Remote control holding register
- Pattern Recognizers
- ROM Chips