SN74HC595DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 419.998185mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2.35mm |
| Length | 10.28mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC595DWG4 Overview
Embedded in a package of type SOIC, the device is available for use. Taking the total number of terminations on the chip and adding them up, we get 16. Voltage rating of the part is 5V. The part consists of 1 elements. Devices with 16 pins are available. It is recommended to mount by Surface Mount. Electronic components are categorized as HC/UH. It's noted that the chip's operating supply voltage is in the range 5V. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There are 8 bits in the IC chip. 16 pins are on it. Under temperatures below 85°C, it is recommended to use it. In order to operate the device, the value should not fall below -40°C. We use this supply voltage under 6V. The supply voltage is higher than 2V. It is necessary to operate 9 output lines.
SN74HC595DWG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74HC595DWG4 Applications
There are a lot of Texas Instruments SN74HC595DWG4 Shift Registers applications.
- Data Processors
- Flash Memory
- Dual-rank shift, hold, and bus applications
- Pattern Recognizers
- Parallel data
- Data Format Converters
- Parallel to serial converter
- Counter
- Remote control holding register
- ROM Chips