SN74HC595DTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC595DTG4 Overview
Embedded in a package of type SOIC, the device is available for use. 16 is the number of terminations on the chip. Presented in a case of Tape and Reel. Its operating supply voltage is rated at 5V. On this part, there are 1 elements. Devices with 16 pins are available. The recommended mounting method is Surface Mount. The electronic component belongs to the HC/UH. A range of 5V is noted as the operating supply voltage of this chip. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There are 8 bits in the IC chip. In total, there are 16 pins on it. Temperatures below 85°C are recommended for use. It should not be lower than -40°C to operate this device. It is employed under the condition of 6V. This supply voltage is employed higher than 2V. A total of 9 output lines need to be operated.
SN74HC595DTG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74HC595DTG4 Applications
There are a lot of Texas Instruments SN74HC595DTG4 Shift Registers applications.
- Output expansion
- Pseudo Random Pattern Generator
- Data manipulation
- data transfer
- Serial to parallel converter
- Serial-to-parallel data conversion
- Pulse Extenders
- 7-segment display control
- Pattern Recognizers
- Parallel to serial converter