SN74HC595DTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC595DTE4 Overview
In package SOIC, there is an embedded device. 16 is the sum of the number of terminations in the chip. A Tape and Reel case holds it. Parts with a 5V operating supply voltage are specified. There are 1 elements on this part. 16 pins are provided on the device. Mounting by Surface Mount is recommended. In this case, the electronic component belongs to the HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. The total number of IC chip bits is 8. In total, it has 16 pins. The product should be used at temperatures below 85°C. Operation of this device requires a value greater than -40°C. A voltage of this type is employed under 6V. The supply voltage is higher than 2V. A total of 9 output lines need to be operated.
SN74HC595DTE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74HC595DTE4 Applications
There are a lot of Texas Instruments SN74HC595DTE4 Shift Registers applications.
- temporary data storage
- Data manipulation
- store data in digital form
- LED matrix control
- Sequence generator
- Pulse Extenders
- Remote control holding register
- Serial-to-parallel data conversion
- Pattern Recognizers
- data transfer