SN74HC595DT
| Parameters | |
|---|---|
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 29MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 80μA |
| Schmitt Trigger | No |
| Number of Output Lines | 10 |
| Height | 1.75mm |
| Length | 9.9mm |
SN74HC595DT Overview
Embedded in a package of type 16-SOIC (0.154, 3.90mm Width), the device is available for use. Chip terminations add up to 16. The case Tape & Reel (TR) contains it. Parts with a 5V operating supply voltage are specified. The part consists of 1 elements. The device is equipped with 16 pins. Surface Mount is recommended for mounting. An electronic component is included in the HC/UH. Surface Mount is the way this component is mounted. A temperature range of -40°C~85°C is used for the operating environment. Votage within 2V~6V is supplied. The 74HC series represents this electrical component. A 74HC595 family can be used to search for similar parts. In terms of supply voltage, this chip operates within the range of 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There should be no less than 2V supply voltage (Vsup) for this part. It can deliver voltage at 2/6V. It is recommended that the maximum supply voltage for this part is not greater than 6V (Vsup). Operating on 10 output lines is possible. In this device, there are a total of 4 circuits. To package the part, TR is used. It runs at 29MHz.
SN74HC595DT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Packing Method : TR
SN74HC595DT Applications
There are a lot of Texas Instruments SN74HC595DT Shift Registers applications.
- ROM Chips
- Parallel data
- Serial-to-parallel data conversion
- Data manipulation
- Interconnectors
- data transfer
- Dual-rank shift, hold, and bus applications
- data manipulation
- Serial-to-parallel data conversion
- 7-segment display control