SN74HC595DR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 42MHz |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Number of Outputs | 9 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Nominal Supply Current | 80μA |
| Propagation Delay | 43 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Number of Inputs | 1 |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 34 ns |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 1μA |
| Schmitt Trigger | No |
| Input Current | 1μA |
| Number of Output Lines | 10 |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595DR Overview
In package 16-SOIC (0.154, 3.90mm Width), there is an embedded device. It sums up to 16 where the chip's terminations add up. It is used to pack in Cut Tape (CT) case. There is 5V operating supply voltage listed on the part. 16 pins are present on the device. The recommended mounting method is Surface Mount. It is a component of the HC/UH. There is a component mounted in the way of Surface Mount on this board. There is a temperature range of -40°C~85°C. Votage is provided within 2V~6V. In this case, the electrical component belongs to the series 74HC. A 74HC595 family can be used to search for similar parts. This chip's operating supply voltage is reported as 5V. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. Ensure that Vsup is not less than 2V when powering this part. Devices with voltage delivery capabilities of 2/6V are available. It is recommended that the maximum supply voltage for this part is not greater than 6V (Vsup). There are 10 output lines to operate. There is a quiescent current of 8μA in this circuit. The part is packaged in the way of TR. 42MHz is the device's frequency. 9 outputs are present on this part.
SN74HC595DR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR
SN74HC595DR Applications
There are a lot of Texas Instruments SN74HC595DR Shift Registers applications.
- Pulse Extenders
- Parallel to serial converter
- data manipulation
- Flash Memory
- Output expansion
- temporary data storage
- Delay Line
- Data Processors
- Serial to parallel converter
- data transfer