SN74HC595DBRE4
| Parameters | |
|---|---|
| Weight | 130.010913mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
SN74HC595DBRE4 Overview
16-SSOP (0.209, 5.30mm Width) is a package containing the embedded device. The number of the chip's terminations sums up to 16. It is used to pack in Tape & Reel (TR) case. The part's operating supply voltage is rated 5V. 16 pins are provided on the device. It is recommended to mount by Surface Mount in order to get the best results. This electronic component is classified as HC/UH. The component is positioned in the way of Surface Mount. A temperature range of -40°C~85°C is used for operation. Votage within 2V~6V is supplied. It is part of the 74HC series of electrical components. If you use the 74HC595 family, you can find parts that are similar. As noted, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. This part must have a minimum supply voltage (Vsup) of 2V. This device has 1 input lines available. A voltage of 2/6V can be delivered by it. This part requires a maximum supply voltage (Vsup) of 6V. A total of 9 output lines are available for operation. In order to package the part properly, TR is used.
SN74HC595DBRE4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC595DBRE4 Applications
There are a lot of Texas Instruments SN74HC595DBRE4 Shift Registers applications.
- ROM Chips
- Data manipulation
- Serial to parallel converter
- Parallel to serial converter
- Remote control holding register
- Generate time delay toward digital circuits
- 7-segment display control
- Remote control holding register
- Pattern Recognizers
- Serial-to-parallel data conversion