SN74HC595D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 42MHz |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Propagation Delay | 250 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 10 |
| fmax-Min | 29 MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595D Overview
There is an embedded device in the package 16-SOIC (0.154, 3.90mm Width). 16 is the total number of terminations on the chip. The case Tube contains it. 5V is the part's operating supply voltage. A total of 1 elements are present on this part. There are 16 pins on the device. Using Surface Mount as a mount point is recommended. In this case, the electronic component belongs to the HC/UH. Surface Mount is the way in which this component is mounted. There is a range of temperatures -40°C~85°C for operation. Votage within 2V~6V is supplied. This electrical component belongs to the 74HC series. You can search for similar parts based on the 74HC595 family. A range of 5V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. There is a capability to deliver voltage at 2/6V. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. Operating on 10 output lines is possible. 8μA is the quiescent current. In this device, there are 4 circuits. The device runs its frequency at 42MHz.
SN74HC595D Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
SN74HC595D Applications
There are a lot of Texas Instruments SN74HC595D Shift Registers applications.
- 8-bit data storage
- Parallel to serial converter
- Remote control holding register
- Data Format Converters
- 7-segment display control
- Parallel data
- Dual-rank shift, hold, and bus applications
- ROM Chips
- Pattern Recognizers
- store data in digital form