SN74HC594NE4

SN74HC594NE4

SN74HC594NE4 datasheet pdf and Logic - Shift Registers product details from Texas Instruments stock available at ORIGCHIP


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-SN74HC594NE4
  • Package: PDIP
  • Datasheet: -
  • Stock: 793
  • Description: SN74HC594NE4 datasheet pdf and Logic - Shift Registers product details from Texas Instruments stock available at ORIGCHIP(Kg)

Details

Tags

Parameters
Mount Through Hole
Package / Case PDIP
Number of Pins 16
Weight 951.693491mg
JESD-609 Code e4
Pbfree Code yes
Number of Terminations 16
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Technology CMOS
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Pin Count 16
Operating Supply Voltage 5V
Number of Elements 1
Temperature Grade AUTOMOTIVE
Max Supply Voltage 6V
Min Supply Voltage 2V
Propagation Delay 25 ns
Family HC/UH
Logic Function Shift Register
Direction Unidirectional
Output Polarity TRUE
Logic IC Type SERIAL IN PARALLEL OUT
Number of Bits per Element 8
Trigger Type POSITIVE EDGE
Number of Output Lines 9
fmax-Min 24 MHz
Max Frequency@Nom-Sup 20000000Hz
Width 7.62mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74HC594NE4 Overview


PDIP package contains the device. This chip has a total termination count of 16. A voltage of 5V is specified for the part's operating supply. On this part, there are 1 elements. It has 16 pins. It is recommended to mount by Through Hole in order to get the best results. An electronic component is included in the HC/UH. As noted, this chip operates within the range of 5V. In total, there are 16 pins on it. At temperatures below 125°C, it is recommended for use. It should not be less than -40°C when operating this device. 6V is the supply voltage used. It is necessary to use a voltage that is higher than 2V to provide this supply. There are 9 output lines to operate.

SN74HC594NE4 Features


With 16 pins
Operate supply voltage at 5V
With 9 output lines

SN74HC594NE4 Applications


There are a lot of Texas Instruments SN74HC594NE4 Shift Registers applications.

  • Data manipulation
  • Remote control holding register
  • Pseudo Random Pattern Generator
  • ROM Chips
  • Dual-rank shift, hold, and bus applications
  • Interconnectors
  • Counter
  • Parallel data
  • 8-bit data storage
  • Serial-to-parallel data conversion

Write a review

Note: HTML is not translated!
    Bad           Good