SN74HC594DWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 419.998185mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC594 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 185 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC594DWRG4 Overview
As a result, 16-SOIC (0.295, 7.50mm Width) package contains the embedded device. There are 16 terminations on the chip. This item is packed in case Tape & Reel (TR). Parts with a 5V operating supply voltage are specified. Devices with 16 pins are available. It is recommended that the mount should be done by Surface Mount. The electronic component belongs to the HC/UH. This component is mounted in the way of Surface Mount. A temperature range of -40°C~85°C is used for the operating environment. During operation, the voltage is within the range of 2V~6V. The 74HC series represents this electrical component. A 74HC594 family can be used to search for similar parts. The operating supply voltage of this chip is noted to be within the range 5V. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER. There should be no voltage less than 2V at the minimum supply voltage (Vsup). The device has 1 input lines. The device is capable of delivering voltage at 2/6V. It should not exceed 6V in terms of the supply voltage (Vsup). 9 output lines are available for operation. TR is the way the part is packaged.
SN74HC594DWRG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC594 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC594DWRG4 Applications
There are a lot of Texas Instruments SN74HC594DWRG4 Shift Registers applications.
- Remote control holding register
- Data Processors
- data transfer
- Serial-to-parallel data conversion
- Flash Memory
- Serial-to-parallel data conversion
- Interconnectors
- Generate time delay toward digital circuits
- store data in digital form
- Output expansion