SN74HC594DWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC594 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 185 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 10 |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC594DWRE4 Overview
Embedded in a package of type 16-SOIC (0.295, 7.50mm Width), the device is available for use. Taking the total number of terminations on the chip and adding them up, we get 16. The Tape & Reel (TR) case contains it. Its operating supply voltage is rated at 5V. On this part, there are 1 elements. 16 pins are present on the device. Mounting by Surface Mount is recommended. An electronic component is included in the HC/UH. In Surface Mount, this component is mounted. It is important to note that the operating temperature range is -40°C~85°C. Votage is supplied within 2V~6V. Similar parts can be found using the 74HC family. Similar parts can be found by searching for the 74HC594 family. As noted, this chip operates within the range of 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER. There must be a minimum supply voltage (Vsup) of 2V for this part. A voltage of 2/6V is possible with this device. This part should not have a supply voltage (Vsup) greater than 6V. The number of output lines to be operated is 10. There are 4 circuits in this device. Packaging is in the form of TR.
SN74HC594DWRE4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC594 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Packing Method : TR
SN74HC594DWRE4 Applications
There are a lot of Texas Instruments SN74HC594DWRE4 Shift Registers applications.
- store data in digital form
- Dual-rank shift, hold, and bus applications
- Pattern Recognizers
- Data manipulation
- Data Processors
- Remote control holding register
- ROM Chips
- data transfer
- Cache memory in CPU
- Flash Memory