SN74HC594DWG4
| Parameters | |
|---|---|
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC594 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 185 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
SN74HC594DWG4 Overview
16-SOIC (0.295, 7.50mm Width) is the package in which the device is embedded. The number of the chip's terminations sums up to 16. There is a Tube case containing it. 5V is the part's operating supply voltage. 16 pins are available on the device. As a general recommendation, mounting by Surface Mount is recommended. Electronic components are categorized as HC/UH. There is a component mounted in the way of Surface Mount on this board. There is a range of operating temperatures -40°C~85°C. During operation, the voltage is within the range of 2V~6V. In this case, the electrical component belongs to the series 74HC. The 74HC594 family can be used to find similar parts. A range of 5V is noted as the operating supply voltage of this chip. There should be no less than 2V supply voltage (Vsup) for this part. As far as the device is concerned, there are 1 input lines available. There is a capability to deliver voltage at 2/6V. A maximum supply voltage (Vsup) of 6V may be applied to this part. Operating on 9 output lines is possible.
SN74HC594DWG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC594 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
SN74HC594DWG4 Applications
There are a lot of Texas Instruments SN74HC594DWG4 Shift Registers applications.
- Data Processors
- Serial-to-parallel data conversion
- Interconnectors
- Output expansion
- Parallel to serial converter
- Delay Line
- LED matrix control
- Cache memory in CPU
- data manipulation
- Remote control holding register