SN74HC594DT
| Parameters | |
|---|---|
| Base Part Number | 74HC594 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 185 ns |
| Turn On Delay Time | 185 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 80μA |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 24MHz |
SN74HC594DT Overview
There is an embedded device in the package 16-SOIC (0.154, 3.90mm Width). 16 is the sum of the number of terminations in the chip. Presented in a case of Tape & Reel (TR). 5V is the operating supply voltage of the part. 16 pins are present on the device. Using Surface Mount as a mount point is recommended. The electronic component belongs to the HC/UH. The component is positioned in the way of Surface Mount. A temperature range of -40°C~85°C is used for operation. Votage is provided within 2V~6V. Similar parts can be found using the 74HC family. A 74HC594 family can be used to search for similar parts. It is noted that the operating supply voltage of this chip falls within the range 5V. There must be a minimum supply voltage (Vsup) of 2V for this part. This device has 1 input lines available. Devices with voltage delivery capabilities of 2/6V are available. This part should not have a supply voltage (Vsup) greater than 6V. A total of 9 output lines need to be operated. There is TR packaging for this part. This device operates at a frequency of 24MHz.
SN74HC594DT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC594 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC594DT Applications
There are a lot of Texas Instruments SN74HC594DT Shift Registers applications.
- Delay Line
- Parallel data
- Counter
- Sequence generator
- data manipulation
- Cache memory in CPU
- Data manipulation
- Data Format Converters
- Remote control holding register
- ROM Chips