SN74HC373PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 285 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC373PW Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. Packaged in the way of Tube. It uses the output configuration Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. The voltage supply is 2V~6V. During operation, the temperature is set at -40°C~85°C. In the 74HC series, this FPGA is located. An electronic part with 8 bits is designed. The device consists of 20 terminations that are designed to be used in conjunction with it. The family it belongs to is 74HC373. It operates with a supply voltage of 5V. The device is equipped with 20 pins. HC/UH is the family of this electronic device. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. 6V is the maximum voltage (Vsup) that can be supplied. There is 2/6V power supply for it. It is recommended to have a higher supply voltage (Vsup) than 2V. Electronic circuits are represented by 8 input lines. Its output current of 7.8mA ensures maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V.
SN74HC373PW Features
20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
SN74HC373PW Applications
There are a lot of Texas Instruments SN74HC373PW Latches applications.
- Avionics
- Buffer register
- Hammer Device Information
- Watches
- Buffer Storage
- Counter control
- Serial Output Register
- Counter
- Counters
- Data acquisition