SN74HC373DWRG4
| Parameters | |
|---|---|
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
SN74HC373DWRG4 Overview
It is embedded in the SOIC package. It is packaged in the way of Tape and Reel. 8 Bits are used in the design of this electronic part. As far as this device is concerned, it has no terminations. With a supply voltage of 5V, it operates. It is equipped with 20 pin count. It is a member of the HC/UH family of electronic devices. With the design of the board, there are only 20 pins. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. Optimal efficiency requires 5V as the supply voltage. 8 circuits are used to provide this superior level of flexibility. In the low level output current, the value is set to 32mA. There is -7.8mA high level output current set. The operating temperature should be lower than 85°C. Temperatures above -40°C should be used. There is a maximum voltage of 6V supported. There is a minimum supply voltage of 2V for it. As for the logic IC it uses, it is a BUS DRIVER. Due to its 7.8mA output current, it offers maximum design flexibility.
SN74HC373DWRG4 Features
SOIC package
8 Bits
20 pin count
20 pins
SN74HC373DWRG4 Applications
There are a lot of Texas Instruments SN74HC373DWRG4 Latches applications.
- Multi-line decoders
- Ring counter
- Shift left register
- Shift right register
- Relay replacement
- Hammer Device Information
- Automotive Cluster
- A/D and D/A conversion
- Automotive Body Electronics
- Motor Drives