SN74HC368PW
| Parameters | |
|---|---|
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ONE FUNCTION WITH TWO BITS |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC368 |
| Pin Count | 16 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 20 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 285 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | Buffer, Inverting |
| Number of Bits per Element | 2, 4 (Hex) |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 6 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
SN74HC368PW Overview
Logical driver uses a neat 16-TSSOP (0.173, 4.40mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74HC series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This buffer driver is part of the HC/UH family of parts. 16 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 16 pins. Enhanced with 2 ports. The bus transceiver employs 2, 4 (Hex) bits for each element. You can search "74HC368" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. Logical driver features ONE FUNCTION WITH TWO BITS to better serve the need. Because of its 6 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74HC368PW Features
Bus Driver/Transceivers
ONE FUNCTION WITH TWO BITS
SN74HC368PW Applications
There are a lot of Texas Instruments SN74HC368PW Buffers & Transceivers applications.
- Lamps
- Sensor reporting
- Broadcast application
- LAN, SAN, WAN (local, storage, work area networks)
- Satellite radio receiver
- Relays
- Precision geodetic measurement
- Satellite communication
- 1x/2x Fiber Channel
- Fiber distributed data interface (FDDI)