SN74HC175PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 4 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC175PWG4 Overview
The package is in the form of TSSOP. A total of 1elements are present in it. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is powered by a voltage of 5V . An electronic device belonging to the family HC/UHcan be found here. There is an electronic part that is mounted in the way of Surface Mount. There are 16pins on it. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. On the basis of its reliable performance, this D flip flop is well suited for use with TUBE. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. High level output current is set to -5.2mA. Low level output current is set to 5.2mA. There should be a temperature below 85°Cduring operation. It should be higher than -40°Cwhen the system is operating. The RS flip flop is designed to operate with a minimal supply voltage of 2VV. It is capable of supporting a maximum supply voltage of 6V. The frequency can be set to 60MHz. The logic IC it adopts is D FLIP-FLOP. As a result, it is equipped with 1 functions . It has 16 pins. Its output current of 5.2mA allows for maximum design flexibility.
SN74HC175PWG4 Features
16 pins
1 Functions
16 pin count
SN74HC175PWG4 Applications
There are a lot of Texas Instruments SN74HC175PWG4 Flip Flops applications.
- Count Modes
- Computers
- Data storage
- Pattern generators
- Counters
- Memory
- Memory
- Automotive
- QML qualified product
- EMI reduction circuitry