SN74HC175DT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 60MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| fmax-Min | 29 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
SN74HC175DT Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. It is configured with Differentialas an output. In the configuration of the trigger, Positive Edgeis used. Surface Mountmounts this electrical part. With a supply voltage of 2V~6V volts, it operates. -40°C~85°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. The 74HCseries comprises this type of FPGA. Its output frequency should not exceed 60MHz Hz. In total, it contains 1 elements. It consumes 8μA of quiescent current without being affected by external factors. The number of terminations is 16. Power is provided by a 5V supply. A JK flip flop with a 3pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V.
SN74HC175DT Features
Tape & Reel (TR) package
74HC series
SN74HC175DT Applications
There are a lot of Rochester Electronics, LLC SN74HC175DT Flip Flops applications.
- Frequency Dividers
- Supports Live Insertion
- 2 – Bit synchronous counter
- Asynchronous counter
- Communications
- Pattern generators
- Digital electronics systems
- Shift registers
- Modulo – n – counter
- Bounce elimination switch