SN74HC166PWT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 29MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC166 |
| Function | Parallel or Serial to Serial |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 80μA |
| Number of Output Lines | 3 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC166PWT Overview
In package 16-TSSOP (0.173, 4.40mm Width), there is an embedded device. Chip terminations add up to 16. The Tape & Reel (TR) case contains it. 5V is the part's operating supply voltage. A total of 1 elements can be found on this part. Devices with 16 pins are available. The mounting method should be Surface Mount. There is an electronic component in the HC/UH. Mounted in the same way as Surface Mount. There is a temperature range of -40°C~85°C. Votage is supplied within 2V~6V. This electrical component belongs to the 74HC series. With 74HC166 family search, you can find similar parts. In terms of supply voltage, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. For this part, the minimum supply voltage (Vsup) should not be less than 2V. There is a possibility of delivering voltage at 2/6V. The maximum supply voltage (Vsup) for this part should not be more than 6V. Operation is available on only 3 output lines. There is TR packaging for this part. It runs at 29MHz.
SN74HC166PWT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC166 family
Operate supply voltage at 5V
It supplies 2/6V power
With 3 output lines
Packing Method : TR
SN74HC166PWT Applications
There are a lot of Texas Instruments SN74HC166PWT Shift Registers applications.
- LED matrix control
- Serial-to-parallel data conversion
- Dual-rank shift, hold, and bus applications
- Data Processors
- data transfer
- Sequence generator
- data manipulation
- Generate time delay toward digital circuits
- Data manipulation
- Counter