SN74HC166PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC166PWRE4 Overview
The device is embedded in TSSOP package. 16 is the total number of terminations on the chip. A Tape and Reel case holds it. Parts with a 5V operating supply voltage are specified. On this part, there are 1 elements. In this device, there are 16 pins. It is recommended to mount by Surface Mount in order to get the best results. In this case, the electronic component belongs to the HC/UH. In terms of supply voltage, this chip operates within the range of 5V. Additionally, please note the following: SISO OPERATION ALSO AVAILABLE. The device has 9 input lines. It has 8 bits in total. It has a total of 16 pins. It is recommended that it be used at temperatures below 85°C. This device should not be operated with a value lower than -40°C. A voltage of 6V is employed as the supply voltage. The supply voltage is higher than 2V. It belongs to the Shift Registers subcategory.
SN74HC166PWRE4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC166PWRE4 Applications
There are a lot of Texas Instruments SN74HC166PWRE4 Shift Registers applications.
- Data Processors
- Parallel data
- Pattern Recognizers
- LED matrix control
- ROM Chips
- Counter
- Flash Memory
- Pseudo Random Pattern Generator
- Sequence generator
- data transfer