SN74HC166PWG4
| Parameters | |
|---|---|
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 32 ns |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC166 |
| Function | Parallel or Serial to Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
SN74HC166PWG4 Overview
There is an embedded device in the package 16-TSSOP (0.173, 4.40mm Width). It sums up to 16 where the chip's terminations add up. Presented in a case of Tube. 5V is the part's operating supply voltage. 1 elements are present in this part. It is equipped with a pin count of 16. Using Surface Mount as a mount point is recommended. The electronic component belongs to the HC/UH. There is a component mounted in the way of Surface Mount on this board. A temperature range of -40°C~85°C is used for the operating environment. During operation, the voltage is within the range of 2V~6V. The 74HC series is associated with this electrical component. With 74HC166 family search, you can find similar parts. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additionally, please note the following: SISO OPERATION ALSO AVAILABLE. This part should have a minimum supply voltage (Vsup) of at least 2V. In this device, there are 9 input lines. A voltage of 2/6V can be delivered by it. Ideally, the maximum supply voltage (Vsup) should not exceed 6V.
SN74HC166PWG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC166 family
Operate supply voltage at 5V
It supplies 2/6V power
SN74HC166PWG4 Applications
There are a lot of Texas Instruments SN74HC166PWG4 Shift Registers applications.
- store data in digital form
- Serial to parallel converter
- Parallel to serial converter
- Interconnectors
- Cache memory in CPU
- Delay Line
- Flash Memory
- Dual-rank shift, hold, and bus applications
- data transfer
- Serial-to-parallel data conversion