SN74HC166NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC166NSRG4 Overview
There is a SOP package embedded with the device. A total of 16 terminations can be found on the chip. The Tape & Reel (TR) case contains it. 5V is the operating supply voltage of the part. It is a part that has 1 elements on it. There are 16 pins on the device. It is recommended to mount by Surface Mount. The electronic component belongs to the HC/UH. This chip's operating supply voltage is reported as 5V. Taking note of the following additional details: SISO OPERATION ALSO AVAILABLE. A device with 9 input lines is available. A total of 8 bits are present on the IC chip. In total, there are 16 pins on it. This product should not be used at temperatures above 85°C. Operation of this device requires a value greater than -40°C. A voltage of this type is employed under 6V. It is used at a higher voltage than 2V. This subcategory falls under the Shift Registers category.
SN74HC166NSRG4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC166NSRG4 Applications
There are a lot of Texas Instruments SN74HC166NSRG4 Shift Registers applications.
- Parallel to serial converter
- Data Format Converters
- Data Processors
- Output expansion
- data manipulation
- Serial-to-parallel data conversion
- Pseudo Random Pattern Generator
- Interconnectors
- LED matrix control
- Counter