SN74HC166NSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC166 |
| Function | Parallel or Serial to Serial |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 3 |
| fmax-Min | 29 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC166NSR Overview
There is an embedded device in the package 16-SOIC (0.209, 5.30mm Width). There are 16 terminations on the chip. The case Cut Tape (CT) contains it. 5V is the part's operating supply voltage. There are 1 elements on this part. 16 pins are available on the device. The mounting method should be Surface Mount. It is a component of the HC/UH. This component is mounted in the way of Surface Mount. A temperature range of -40°C~85°C is used for the operating environment. There is a votage of 2V~6V provided with it. 74HC is the series number of this electrical component. A 74HC166 family can be used to search for similar parts. It is noted that the operating supply voltage of this chip falls within the range 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. For this part, the minimum supply voltage (Vsup) should not be less than 2V. A voltage of 2/6V can be delivered by it. This part should not have a supply voltage (Vsup) greater than 6V. A total of 3 output lines are available for operation. There is TR packaging for this part.
SN74HC166NSR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC166 family
Operate supply voltage at 5V
It supplies 2/6V power
With 3 output lines
Packing Method : TR
SN74HC166NSR Applications
There are a lot of Texas Instruments SN74HC166NSR Shift Registers applications.
- store data in digital form
- Serial-to-parallel data conversion
- LED matrix control
- 7-segment display control
- Interconnectors
- Data Processors
- Sequence generator
- Serial to parallel converter
- temporary data storage
- Parallel to serial converter