SN74HC166DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 190 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC166DG4 Overview
The device is embedded in SOIC package. 16 is the sum of the number of terminations in the chip. Voltage rating of the part is 5V. A total of 1 elements can be found on this part. 16 pins are located on the device. Surface Mount is recommended for mounting. Electronic components are categorized as HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. Additional aspects of this section are as follows: SISO OPERATION ALSO AVAILABLE. There are 9 input lines available in the device. There are 8 bits on the IC chip. 16 pins are on it. The product should be used at temperatures below 85°C. This device should not be operated with a value lower than -40°C. Under 6V, this supply voltage is employed. It is used at a higher voltage than 2V. In terms of its subcategory, it belongs to Shift Registers.
SN74HC166DG4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC166DG4 Applications
There are a lot of Texas Instruments SN74HC166DG4 Shift Registers applications.
- Delay Line
- data transfer
- Remote control holding register
- Interconnectors
- Counter
- Pulse Extenders
- LED matrix control
- Serial to parallel converter
- store data in digital form
- Flash Memory