SN74HC165QPWRQ1
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAIALABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 225 ns |
| Turn On Delay Time | 225 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.490116mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
SN74HC165QPWRQ1 Overview
This device can be found embedded within the package 16-TSSOP (0.173, 4.40mm Width). A total of 16 terminations can be found on the chip. Presented in a case of Tape & Reel (TR). This part has an operating supply voltage of 5V. A total of 1 elements can be found on this part. 16 pins are located on the device. It is recommended to mount by Surface Mount in order to get the best results. This electronic component is classified as HC/UH. Surface Mount is the way in which this component is mounted. Operating temperatures are within the range of -40°C~125°C. There is a votage of 2V~6V provided with it. Automotive, AEC-Q100, 74HC is the series number of this electrical component. Similar parts can be found by searching for the 74HC165 family. According to the specification, this chip's operating supply voltage falls within the range of 5V. The following additional aspects of this section are worth noting: SISO OPERATION ALSO AVAIALABLE. There should be no less than 2V supply voltage (Vsup) for this part. In the device, there are 9 input lines. A device capable of delivering voltage at 2/6V can be used. This part should not have a supply voltage (Vsup) greater than 6V. To package the part, TR is used.
SN74HC165QPWRQ1 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
Operate supply voltage at 5V
It supplies 2/6V power
Packing Method : TR
SN74HC165QPWRQ1 Applications
There are a lot of Texas Instruments SN74HC165QPWRQ1 Shift Registers applications.
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Pseudo Random Pattern Generator
- temporary data storage
- Pattern Recognizers
- data manipulation
- Data manipulation
- Parallel to serial converter
- data transfer