SN74HC165QPWREP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CLOCK INHIBIT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 225 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC165QPWREP Overview
16-TSSOP (0.173, 4.40mm Width) package contains the device. 16 is the sum of the number of terminations in the chip. There is a Tape & Reel (TR) case containing it. The part operates at 5V voltage. There are 1 elements on this part. It has 16 pins. The recommended mounting method is Surface Mount. The electronic component belongs to the HC/UH. Surface Mount is the way in which this component is mounted. A temperature range of -40°C~125°C is used for the operating environment. There is a voltage supply within 2V~6V. The 74HC series contains this electrical component. A 74HC165 family can be used to search for similar parts. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additionally, please note the following: CLOCK INHIBIT. There must be a minimum supply voltage (Vsup) of 2V for this part. In the device, there are 9 input lines. There is a capability to deliver voltage at 2/6V. A maximum supply voltage (Vsup) of 6V may be applied to this part. In order to package the part properly, TR is used.
SN74HC165QPWREP Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
Operate supply voltage at 5V
It supplies 2/6V power
Packing Method : TR
SN74HC165QPWREP Applications
There are a lot of Texas Instruments SN74HC165QPWREP Shift Registers applications.
- Serial to parallel converter
- Remote control holding register
- Parallel to serial converter
- Data Processors
- data manipulation
- Counter
- ROM Chips
- Serial-to-parallel data conversion
- Remote control holding register
- LED matrix control