SN74HC165PWTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC165PWTG4 Overview
There is an embedded device in the package TSSOP. 16 is the number of terminations on the chip. Tape and Reel is the case in which it is packed. Parts with a 5V operating supply voltage are specified. 1 elements are present in this part. 16 pins are provided on the device. It is recommended that the mount should be done by Surface Mount. Electronic components are categorized as HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. Additional aspects of this section include: SISO OPERATION ALSO AVAILABLE. This device has 9 input lines available. IC chips contain a total of 8 bits. This board has 16 pins in total. Under temperatures below 85°C, it is recommended to use it. Ideally, it should not fall below -40°C. Under 6V, this voltage is employed. This supply voltage is employed higher than 2V. Shift Registers is its subcategory.
SN74HC165PWTG4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC165PWTG4 Applications
There are a lot of Texas Instruments SN74HC165PWTG4 Shift Registers applications.
- Interconnectors
- Pulse Extenders
- data transfer
- Pattern Recognizers
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Flash Memory
- Serial-to-parallel data conversion
- Data manipulation
- Output expansion