SN74HC165PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC165PWRE4 Overview
As a result, TSSOP package contains the embedded device. Chip terminations add up to 16. It is used to pack in Tape and Reel case. A voltage of 5V is specified for the part's operating supply. There are 1 elements on this part. In this device, there are 16 pins. As a general recommendation, mounting by Surface Mount is recommended. Electronic components are categorized as HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. In this device, there are 9 input lines. There are 8 bits in the IC chip. The pin count is 16. The product should be used at temperatures below 125°C. This device should not be operated with a value lower than -40°C. We use this supply voltage under 6V. There is a voltage applied to the supply that is greater than 2V. The subcategory in which it falls belongs to is Shift Registers.
SN74HC165PWRE4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC165PWRE4 Applications
There are a lot of Texas Instruments SN74HC165PWRE4 Shift Registers applications.
- Remote control holding register
- Interconnectors
- Dual-rank shift, hold, and bus applications
- Pseudo Random Pattern Generator
- Parallel data
- Serial to parallel converter
- Generate time delay toward digital circuits
- store data in digital form
- Flash Memory
- Data Processors