SN74HC165NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC165NSRG4 Overview
In package SOP, there is an embedded device. Chip terminations add up to 16. Presented in a case of Tape & Reel (TR). Its operating supply voltage is rated at 5V. This part has 1 elements. 16 pins are located on the device. Surface Mount is recommended for mounting. In this case, the electronic component belongs to the HC/UH. It's noted that the chip's operating supply voltage is in the range 5V. The following additional elements are important to note: SISO OPERATION ALSO AVAILABLE. As far as the device is concerned, there are 9 input lines available. IC chip bits total 8. It has a total of 16 pins. It is recommended that it be used at temperatures below 125°C. For this device to operate, it cannot be lower than -40°C. Under 6V, this supply voltage is employed. It is necessary to use a voltage that is higher than 2V to provide this supply. The subcategory of this item is Shift Registers.
SN74HC165NSRG4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC165NSRG4 Applications
There are a lot of Texas Instruments SN74HC165NSRG4 Shift Registers applications.
- data manipulation
- 7-segment display control
- Dual-rank shift, hold, and bus applications
- Sequence generator
- Generate time delay toward digital circuits
- LED matrix control
- Counter
- Parallel data
- Data Format Converters
- data transfer