SN74HC165NSR
| Parameters | |
|---|---|
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Qualification Status | Not Qualified |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
SN74HC165NSR Overview
16-SOIC (0.209, 5.30mm Width) is a package containing the embedded device. The number of the chip's terminations sums up to 16. Presented in a case of Cut Tape (CT). Parts with a 5V operating supply voltage are specified. On this part, there are 1 elements. It is equipped with a pin count of 16. Using Surface Mount as a mount point is recommended. An electronic component is included in the HC/UH. The component is positioned in the way of Surface Mount. There is a range of operating temperatures -40°C~125°C. There is a voltage supply within 2V~6V. The 74HC series contains this electrical component. Search for similar parts based on the 74HC165 family. 5V is noted as the operating supply voltage of this chip. The following additional aspects of this section are worth noting: SISO OPERATION ALSO AVAILABLE. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. As far as the device is concerned, there are 9 input lines available. A device capable of delivering voltage at 2/6V can be used. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. A quiescent current of 8μA is used to run the device. In order to package the part properly, TR is used.
SN74HC165NSR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
Operate supply voltage at 5V
It supplies 2/6V power
Quiescent Current at 8μA
Packing Method : TR
SN74HC165NSR Applications
There are a lot of Texas Instruments SN74HC165NSR Shift Registers applications.
- store data in digital form
- Interconnectors
- Serial-to-parallel data conversion
- Parallel data
- Dual-rank shift, hold, and bus applications
- Data Format Converters
- Output expansion
- Remote control holding register
- ROM Chips
- data transfer