SN74HC165DT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 29MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Qualification Status | Not Qualified |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 80μA |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC165DT Overview
The device is embedded in 16-SOIC (0.154, 3.90mm Width) package. The number of the chip's terminations sums up to 16. Presented in a case of Tape & Reel (TR). 5V is the operating supply voltage of the part. A total of 1 elements are present on this part. The device is equipped with 16 pins. Mounting by Surface Mount is recommended. Electronic components belong to the HC/UH group. Its mounting method is Surface Mount. It is important to note that the operating temperature range is -40°C~125°C. Votage is supplied within 2V~6V. This electrical component belongs to the 74HC series. You can search for similar parts based on the 74HC165 family. In terms of supply voltage, this chip operates within the range of 5V. The following additional elements are important to note: SISO OPERATION ALSO AVAILABLE. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. The device has a total of 9 input lines. There is a capability to deliver voltage at 2/6V. The maximum supply voltage (Vsup) for this part should not be more than 6V. TR is the way the part is packaged. There is 29MHz frequency set on the device.
SN74HC165DT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
Operate supply voltage at 5V
It supplies 2/6V power
Packing Method : TR
SN74HC165DT Applications
There are a lot of Texas Instruments SN74HC165DT Shift Registers applications.
- Parallel to serial converter
- 8-bit data storage
- Counter
- Remote control holding register
- Cache memory in CPU
- Flash Memory
- data manipulation
- temporary data storage
- Data Format Converters
- Interconnectors