SN74HC165DE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 62MHz |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Input Current | 1μA |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC165DE4 Overview
Embedded in a package of type 16-SOIC (0.154, 3.90mm Width), the device is available for use. There are 16 terminations on the chip. A Tube case is used to pack it. Voltage rating of the part is 5V. 1 elements are present in this part. 16 pins are present on the device. It is recommended to mount by Surface Mount in order to get the best results. It is a component of the HC/UH. Its mounting method is Surface Mount. There is a range of operating temperatures -40°C~125°C. There is a votage of 2V~6V provided with it. This electrical component belongs to the 74HC series. The 74HC165 family can be used to find similar parts. This chip's operating supply voltage is reported as 5V. There are also the following additional considerations in this section: SISO OPERATION ALSO AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 2V. In the device, there are 9 input lines. A device capable of delivering voltage at 2/6V can be used. This part requires a maximum supply voltage (Vsup) of 6V. It runs at 62MHz.
SN74HC165DE4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
Operate supply voltage at 5V
It supplies 2/6V power
SN74HC165DE4 Applications
There are a lot of Texas Instruments SN74HC165DE4 Shift Registers applications.
- Remote control holding register
- 7-segment display control
- Remote control holding register
- data transfer
- Flash Memory
- Output expansion
- Generate time delay toward digital circuits
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Pulse Extenders