SN74HC165DBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC165DBRG4 Overview
As a result, SSOP package contains the embedded device. 16 is the total number of terminations on the chip. There is a Tape and Reel case containing it. This part has an operating supply voltage of 5V. On this part, there are 1 elements. It has 16 pins. The mounting method should be Surface Mount. Electronic components fall under the category of HC/UH. As noted, this chip operates within the range of 5V. Additionally, please note the following: SISO OPERATION ALSO AVAILABLE. A device with 9 input lines is available. The total number of IC chip bits is 8. In total, it has 16 pins. It is recommended that it be used at temperatures below 85°C. Ideally, it should not fall below -40°C. It is used under the 6V supply voltage. This supply voltage is employed higher than 2V. Shift Registers is its subcategory.
SN74HC165DBRG4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC165DBRG4 Applications
There are a lot of Texas Instruments SN74HC165DBRG4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Parallel data
- 7-segment display control
- Pulse Extenders
- Generate time delay toward digital circuits
- Delay Line
- Serial-to-parallel data conversion
- data manipulation
- Sequence generator
- Data manipulation