SN74HC165D
| Parameters | |
|---|---|
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Ambient Temperature Range High | 125°C |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 36MHz |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Number of Outputs | 1 |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Nominal Supply Current | 8μA |
| Output Current | 5.2mA |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
SN74HC165D Overview
Embedded in a package of type 16-SOIC (0.154, 3.90mm Width), the device is available for use. 16 is the sum of the number of terminations in the chip. There is a Tube case containing it. 5V is the part's operating supply voltage. 16 pins are available on the device. The recommended mounting method is Surface Mount. In this case, the electronic component belongs to the HC/UH. Mounted in the same way as Surface Mount. Operating temperatures are within the range of -40°C~125°C. The voltage supplied to it is within the range of 2V~6V. It is part of the 74HC series of electrical components. Similar parts can be found by searching for the 74HC165 family. 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: SISO OPERATION ALSO AVAILABLE. This part must have a minimum supply voltage (Vsup) of 2V. This device has 9 input lines available. Voltage can be delivered at 2/6V. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. Frequency 36MHz is used by the device. This part has 1 outputs built in to it.
SN74HC165D Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
Operate supply voltage at 5V
It supplies 2/6V power
SN74HC165D Applications
There are a lot of Texas Instruments SN74HC165D Shift Registers applications.
- data manipulation
- LED matrix control
- Generate time delay toward digital circuits
- Pseudo Random Pattern Generator
- Pulse Extenders
- Output expansion
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Flash Memory
- Serial-to-parallel data conversion